(2)JL AUDIO 10w7's
Free Air Resonance (Fs) 30.6 Hz Electrical “Q” (Qes) 0.578 Mechanical “Q” (Qms) 7.647 Total Speaker “Q” (Qts) 0.537 Equivalent Compliance (Vas) 1.28 cu ft / 36.1 L One-Way Linear Excursion (Xmax)* 0.9 in / 23 mm Reference Efficiency (no) 0.1700% Efficiency (1 W / 1 m)** 84.3 dB SPL Effective Piston Area (Sd) 59.8 sq in / 0.0386 sq m DC Resistance (Re) 2.75 Ω
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.
Sealed Enclosure Specifications
nice condition one has original box/packing
W7 10-inch Subwoofer Driver (750 W, 3 Ω)
If you are seeking reference-grade sub-bass from a 10-inch driver, your search ends here. Total Car Audio
in the UK called it like this when they reviewed the 10W7: "This gives an all round performance of such high quality on every level, that bettering it will be very hard to achieve." Not only does the 10W7 deliver amazing excursion capability for its size, but it also maintains complete composure under power and is able to track complex bass material with uncanny accuracy and power.
The 10W7 is best used with amplifier power in the 300W - 750W range and is optimized to operate in a 1.25 cu. ft. (35.4 l) sealed enclosure, or a 1.5 cu. ft. (42.5 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab.
$450 for the pair plus $45 shipping!
(CON US ONLY) im sure I will be helping on shipping!!
looking for good amps,sound deading products,hell even hunting/fishing related items!! Jim(814)493-7199 any hr! NOTE: calling me is surest way to reach me!!
other items in pics are for trade/sell as well! have lots of other items(just ask!)
** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
This message is automatically inserted in all classified threads.
Please be advised, all buyers and sellers should satisfy themselves that the other party is genuine by providing the following via PM to each other after negotiations are complete and prior to dispatching goods and making payment:
1) Telephone number. Call the number back at a unspecified time and make sure that it is the person's correct phone number.
2) Name and address including postal code
3) Valid e-mail address. Send an e-mail requesting a response to information about the deal being made.
DO NOT proceed with a deal until you are completely satisfied with all details being correct. It's in your best interest to check out these details yourself.
If transaction was completed on CACO, please use iTrader to record feedback.
Potential buyers/seller should check iTrader feedback also before continuing transaction.