After a long slumber it'll be back in action. Still have the AQ20 in hibernation and already have the first 15 on the way (you'll see what I'm going with when the first one arrives)
Starting today the saturn will be seeing steady work, though a lot of the work/progress will be pretty boring because it'll consist of taking the sunroof out to reinforce the ceiling and glass the whole roof of the car over and repainting it so it'll be solid and leakproof.
The interior/floor/everything will be slicked out to be one flowing surface inside, center console will be glassed in place, also flowing into the floor seamlessly etc etc.
I'm hoping I'll have enough time to get to the inside of the box, slick everything out, paint it, and cut a hole on each side of the enclosure with plexi to see inside (but no promises).
I have 4 pairs of components I'm hoping to get in as well but one pair has been in the saturn for years and years (lame)...so I may be hunting down another pair so everything's new. Reinforcing the front doors will be in order if the mids happen...may be heading to my buddy to weld inside the doors and then I'll reinforce/deaden further.
And once the sunroof is out completely/foam all cleared out I'll be getting to some lighting of some kind in the ceiling on the interior but havent decided on what I'm going to do there.
Anyways, here's a little I got done just now...
The pyles...all blown
...they actually weren't bad at all for what they're worth...
More when it happens...
Louder. Lower.Team Tupperware
<First and only dual-alternator 'real' Saturn (pre 2002) on the planet>To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
'Horn'-wall: 12.75 cubes net, ~25Hz tuning
, 200 sq inches of port area (lowz..?)
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
"If it's been done before, you're doing it wrong"