Ive had this one going on some other forums figured I would swap it over to here as well. Its coming along slowly but surely.
Im starting a new project for my zx2. I was hezitate to start the build log because i know its going to take a long time because im only working on it on the weekends. But last weekend i got the whole interior ripped out to start the custom fab work and then do some damp pro and spectrum and then today while figuring out placement of the speakers i ran into a lil delima. Which ill explain more later.
As for whats going into it I have...
Active 3 way component setup containing
4 6 1/2" whip audio mid ranges
2 earthquake screamer tweets
2 8" fosgate p2's for mid bass
all controlled by the ma audio ma30eqx or maybe an audiocontrol I still need to get that.
passive 2 way component setup containing
2 6 1/2" Koda6 Mark II
2 MB Quartz tweets
2 MB Quartz crossovers
Custom fiberglass 4th order bandpass enclosure containing
1 15" Crossfire BMF
Being powered by...
front tweets- kicker kx200.2
front midrange- Aura Force 400-q-A
midbass- JBL GTO 601.1 II
rear stage- JBL BP 150.1
sub- Crossfire BMF 1000D
and signals from an alpine flip out IVA-D900
And yes this system will have proper wiring. Im running 2 runs of 1/0 from the front to the 3 rear batts (small genesis NP18-12BFR basically kenetik 600's), 4 gauge to all the amps, 8 gauge to the subs, 12 or 10 gauge to the mids, and 16 gauge to the tweets.
As for the damplifier im going with damplifier pro everywhere. just one layer. Then a layer of spectrum sludge on top of all that but the roof and trunk lid and then a layer of spectrum sludge under the cars floorboards.
Everything is going to be stealth installed and look semi-stock you wont know its not factory unless you have a good eye and know the car.
Ill shut up for now for pics
first system engine bay fuse placement
trunk all out
now everything but the seats and dash