Doing a new wall in my yukon.
First was 4 OA 18's C-Pillar on an AB 500.1
Second was 4 Tantric HDD-15's on an AB 1100.1
Third was 4 American Bass XO 15's in that same wall on 2 SQ 2200.1's
Fourth wall was 4 American Bass XO 15's in a 4th order on 2 SQ 2200.1's
Hopefully this will be the last time I rip out my wall and start over
Plan Is 6 Soundqubed HDS315's on 4 SQ 2200.1's
a 15 and 4 6.5's in each door
a 3" and a planar tweet in the A-pillar cause SQ
4 8's in the center console
and 100 6.5's that I will try to jam in there
other misc amps are
2 PPI 900.4's
2 one off prototype amps, the smaller of the 2 has 120 amps internal fusing, the other one is about 30% bigger and has 1/0 inputs, so you do the math.
crescendo 1000c4 cause I go for the gold
2 soundqubed 200.2 amps
as much wire as i see needed and as many batteries as this ish can hold once I get new springs.
trying to get a DC quad alt kit... so hook a brother up.
BTW wall will be 24ish cubes net with as much port area as I can fit tuned to the mid to high 30's.