Ok so I traded in my WRX for this truck and as always I'm looking to upgrade the stereo. I have pretty much everything that I took out of the WRX and I'm still debating on how much of it, if any I want to use. I sure could use some help and opinions on what to do.
(2) PPI 900.4s
Morel 6" mids
Morel integra 402 point sources
First thing is the sub setup, as you can see in the pics, I don't have much room at all.
First option, I'm thinking about maybe doing 6.5" or 8" subs ported firing towards the front windshield with some grilles to protect the subs.
2nd would be a couple of slim subs down firing under the rear seat.
Next problem is the frontstage. I'm not sure if I can fit the Morel integra 402s in the dash, if not, than I might have to just do a 2 way frontstage with the tweeters in the dash. I don't really want to put too many holes in this car yet. The front doors hold 6x9s and I might be able to get away with fitting my Morel 6" mids and a small 3" mid on the same baffle in the doors and throw the tweet in the dash for a 3way. Any suggestions?
Finally mounting the amps, processor, and LOC.
The audiocontrol I'll have to install for the preouts. It will be ran off the front speaker level outs of the stock hu. The rear speakers will stay running off the factory hu for rear fill and I'll just turn the fader to the front if I want it off.
PPI amps barely fit under the seats or behind one side of the rear seats. I think I can fit two amps behind the rear seats. I might just have to go with a 6ch amp and sub amp or 2 5ch amps if I go with just a two way frontstage.
Here's some pics of what I'm working with.
Sent from my SM-G928T using Tapatalk