I think its about that time
Im going to be building a horn ontop of my current enclosure upto the b-pillar, continuing the top of the horn upto the windshield as the ceiling to make one, smooth surface from the port to the windshield. I also eventually plan on tearing out the front of my box to remake it to fit (8) 10" Fi Q's...I'll need more coil for a beast that may be heading my way
All of this should bring my new enclosure specs to approx. 10.2 cubes net, 200 sq inches of port area, and should bring the tuning to ~27-28hz
I also plan on adding batteries in the trunk and the sides of the horn aswell...lets just say the satty will be rolling on over 10kw
I will be ordering beefed-up springs for the rear suspension aswell.
A good handful of you have seen the design but for those who havent, here it is:
I got a few things cut and mocked-up tonight but only had my phone camera, they'll be uploaded shortly...better pics tomorrow/this week though.
Louder. Lower.Team Tupperware
<First and only dual-alternator 'real' Saturn (pre 2002) on the planet>To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
'Horn'-wall: 12.75 cubes net, ~25Hz tuning
, 200 sq inches of port area (lowz..?)
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
"If it's been done before, you're doing it wrong"