I need the help of those heavy cone area guys because i'm workin on a design in my scion tc and have a few options to go with BUT each choice is based upon install.. which will greatly effect pressure output...
this is what i have and so on...
i will only be able to run a single 270A alt
batt up front, 6 G31s in the back. Maybe D3100s since i'm pressed for space. So, 6 D3100s.
Amp power- 21-30kw
I need to contact XS to see what my theoretical V drop will be after 30-60sec.. but i've ran worse without issues..
LAst year i ran 21kw off stock alt and 2 batts for 30-60sec for 3 months without any problems. MAX power pull was 898A on music.
OK, back to the thread-
I am staying with DC because.. well hell, they have everything i need, hehe.
I can run the following-
16 10" Lvl3s off 21,000w @32hz
12 12" Lvl4s off 28,000w @35hz
4 18" Lvl5s off 28,000w @32hz
Now onto how they would be installed-
4 18s would be traditional ported wall with port down the middle.
the 12s and 10s are built in a "Tunnel wall".
I know nothing of these, they look like they would cause massive phasing and cancelation but i know some people have built them and get loud...
For the 10s- 8 10s would be in front of the wall, and the other 8 10s would be mounted inside the port, 4 on each side.
For the 12s- 8 12s would be in front of the wall, and the other 4 12s would be mounted inside the port, 2 on each side.
I have also seen the diamond wall not ported and i know nothing of the potential for this design as well..
I am not building anything else after this.
I wanted a 160 driver but i don't think i can do this with my focus of constant output vs burp so the goal is to get the loudest sustained score i can get. I'm not really into burps.
So, what should i be doing or is there another option out there i should look into from DC?
I'm currently eye-balling the 12 12" Lvl4s as i think they have the best potential.