Hello. I am hoping someone would be willing to help me out with a bandpass design for a pair of a/d/s 308rs subwoofers (I am willing to pay for these services). The vehicle is a 2005 Ford Crown Victoria LX Sport. I have 750wrms @ 4 ohms (rated) on tap for the pair. I would like for the design to take into consideration the fact that I will be firing this through a 8" diameter hole in the rear deck that is the stock subwoofer location. I have about 12-13" in height between the package shelf and rear deck, about 10-11" from front to back and 40"+ in width from one side of the package shelf to the other.. My goal is to have an enclosure that will play from between 20-30 and 60-80 with the flattest response possible. Here are some specs to go off of...
qes = 0.60
qms = 2.58
qts = 0.49
fs = 35.2
vas = 28.9l
xmax = 9.4mm
pe = 400wrms
spl = 86.47dB
voicecoils = DVC 4ohm
If you need any further information, please let me know.
orangelss, SPY, 98GMC, MLyons-Jr (2x), laserred97gt, kmanian1, sotelomichael, dB-r_Electronics, EpicenterDesigns
SPY, fasfocus00, bones22, dbdragguy, kmanian1, TeamPSI (2x), 80inches, pioneer~saturn, sotelomichael, vic713, dB-r_Electronics, Lance_aka_64
Originally Posted by 80INCHES
just build the box and sit back and let the bass flex the $hit out of ur ride
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.