Been racking my brain trying to figure out how to port this box. There's going to be about 1.1 cf on each side before displacement and will be using Sundown SA-10 (one on each side)
The issue is I want to tune low like 28hz to retain sq. The other issue is that the fiberglass portion of the box isn't usable for a port because the box sets under the back seat of my Dodge Ram. Most of the calculators I've tried call for a really long port.
Maybe it's better to go sealed? I've always done sealed and like the sound from them but wanted to try porting.
One more thing, the front of the box (where the cutout in the middle is) will be about 2" taller, but the back of the box is as tall as it can get.
Anyhow, Here's the box: