Ok so I'm thinking of buying a 24" top assembly from Tantric, for my SHD motor. I was thinking of doing a 4th order blow through in my 2008 ext cab silverado.
Currently I have one of the rear seats out, and have my single 15" ss xxx in 4.5 net, tuned to 29hz. I have a nsb 110 under that (under false floor). My gp3k is behind the two remaining rear seats, and my ppi900.4 is under the passenger seat.
I want to do the 24" SHD, a rockford T30001-bd, and rockford t800-4bd.
The 800-4 won't fit under the passenger seat, the t30001 can't go behind the seats if I'm doing a blow through (which I will have to do for a 24" sub if I want to keep any rear seats).
I'm looking for ideas of where to put the amps, and some help with enclosure design. I HAVE TO KEEP AT LEAST 2 REAR SEATS!!
Has anyone done a blow through with a single 24" sub on here before?
Any ideas help, thanks in advance.
Btw, I have two more Duracell Agm batts under the hood as well as the nsb110.
2003 6.8L V10 Excursion Limited
2015 MECA STREET 5 WORLD CHAMP