Im helping a friend on a build. With no t/s kinda makes it hard to design an enclosure.
That being said, it will be in the trunk of a 2 door 2000 honda accord. Walling the trunk isnt an option at this point. Aiming for a decent single sub setup.
Ive never done a trunk build, so im thinking sub up will cause a lot more trunk rattle that we might not can deaden out. Im leaning to sub firing driver back, port passenget back.
As for the enclosure itself i was thinking a generic 3-3.5 [email protected]
with roughly 10-12" of port to cube. Im not sure which way to go as far as the amount of port. Will be run 1 ohm nominal on a hifi brutus 1400. Hoping for an ideal ~800 watts to play with.