Ok well i got a hell of a deal on this si hst-15 so im gunna run this home theater sub in my tahoe as i have had success with the si ht-15's that are in there now. iam planning on running all three (nick said it would be fine no crazy cancellation issues) with 1200-1600 for the ht-15's and 1600-2000 for the hst-15 all in seperate chambers 3-3.25 cubes each with each chamber having a 6" aero port (home made pvc aero) will the hst be fine with only a 6" aero? I was told by Nick to keep the box between 2.5-3 cubes and tune around 30-32hrz. this sub is similar to a zv4 15 but with a softer spider. but when i add two 6" aero's into the equation the lenght is crazy long due to the small enclosure. and of course a small enclosure its hard to fit all that pipe (haha no joke needed) will i lose alot of output with only 28.25" of port area? below is the subs parameters:
Posted by Electrodynamic on HTS on 12/2/2013
Here are the parameters for this 15" HST D2 prototype prior to being fully thrashed...I mean fully broken-in.
Re: 3.4 Ohm
Fs: 21 Hz
Le: 3.5 mH
Vas: 98.5 liters
Mms: 434 g
SPL: 86 dB
Just a LITTLE different than a Zv4.
I'll be building an 18" version of this woofer this week.
Read more: http://www.hometheatershack.com/foru...#ixzz2mMQlkaRw
Current setup: 2 Obsidian Audio 18's with 8 layer aluminum spl coils and spiders
Power is via 2 car audio bargain CAB-1600.1's strapped @1 ohm. ..also in my spare bag of goodies is...
2 Stereo Integrity HT-15's
1 Stereo Integrity HST-15
2005 Tahoe which I nicknamed the william hung.... because she bang! Haha!