I'm thinking of Switching 3 of my 4 dc lvl4 xls into tens and put them in my trunk. Website says 1cf per sub, I'll be running 2,500rms to each sub and max dimensions are 36w 16t and 19-20in deep and want 33-36hz tuning. Just want some box ideas before I convert two 12s and a 15 into 3 tens
I was thinking either subs on top of the face of the box and port on the bottom flat wide and deep port, or subs on top of the face of the box and in between the subs two 4in aeroports or two 6in aeroports. Idk if one 6 would be enough or if two 4in aeroports would be enough. Any suggestions would not hurt at all!