ok, heres the deal. i have this motor right here, i got it in a trade and dont know too much about it. i was told it might be a RE HC, or a concept csp. what do you guys suggest i do with it? i want to make it a 15 that handles about 3k daily....this is what i know
tripple 3/4 slugs. 3 in coil. 1/4 in gap. overall width is 7.5 in. and 4.5 in tall including the pole. i have been told these are very similiar to a 3HP motor. weighs right at 40 pounds.