The hardest part is gonna be getting the old coil out of there. From what I've seen you have to bend the former on the coil to loosen/break the glue joint and pop the coil out, then take a grinder to the rest of the glue until you get down to the cone.
The same goes for the surround. I've never done a kevlar cone before, but I know the general steps it takes.
If you want some help I suppose I could help you out.
They are definitely reusable though.
10 inches of terror
One DD 9510F + one kicker zx2500=150+ db
One Sundown SA-8 + 2 mb quart 2000's = 150+ db
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
-2006, 2007, 2009, and 2010 MECA World Champion
-2008 Bassrace 130-139.9 National Champion