Thanks guys! I do not get over here often anymore!
Although the photos do not show a lot of "progress" making this enclosure has taken quite a bit of time and it is pretty close to being finished.
This is my first time working with fiberglass, a good friend of mine has taken the time to show me the basics of this process and to be honest I have no idea why I was so worried about working with fiberglass. For the most part it is a pretty simple process that takes a lot of time!
What you see going on here is the stock Scion xB foam storage bin being wrapped with fleece and used to make a mold for the base of the sub woofer enclosure.
This took about a gallon of resin so far and I still have quite a bit of coating to do to get it solidified enough to support the pressure of the i10SW.
Anyway here are a few photos to gawk at. I will be applying a coat of resin every day on the outside and inside of the enclosure.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
2012 West Coast INAC Amateur SQ 1st place Champion!
2012 National 2nd place INAC Amateur SQ Champion!