1.) What brand and size battery.
c&d technologies ups12-490mr
2.) How many.
3.) What material to be used.
4.) Tapped holes for ring terminals or direct wire input using set screws.
5.) How are you going to have them layed out. Will they be back to back, or spacing in between each?
Back to Back.
6.) What size screw does your batteries use( if that is the style of connection). Not all batteries use the same screw size.
7.) A picture of the battery you have. There are old and new ones of the same size and brand out there, and they have some differences to them.
2 c&d technologies ups12-490mr
I also ask for a quick measuring of your batteries and how they are layed out so the buss bars will be a great fit. Below is a drawing of the basic measurements I would need off a single battery, and then for multiples.
Width 13.57" Height 10.93" Depth 6.76"
"A medic never stands taller then while kneeling to treat the wounded"
Refs @ ca.com: Winkychevelle, SKARaudio x2, Patthehat033, Mazdakid, Ten_ton_bass, GAMEOVERCCA, Horsemanwill, Boomsday, Zellner, g6ryder x2, Moble Enclosurs (Box design), Goodstuff, Bread0710, dgaf, Cat Man, Double07
Ebay Feedback: 100% on over 90 transactions.. Link available upon request