I was able to check the measurements using a set of drill bits. The speaker outputs are 5/16" apart (inside edge to inside edge). There seems to be a slight variance in diameter of the outputs though. The positive output fit a 13/64" bit with little play, however the negative output barely fit a 13/64" bit with no play. Both speaker outputs were 3/8" deep. On the power and ground input side, the only thing I noticed is that the terminals are a good bit shallower than the typical Korean built amps I'm used to. I look forward to hearing from you! Thanks again!
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
KIDS SAY THE DARNDEST THINGS-