i am currently working on a deal for some 1inch thick plastic boards. these boards are big enough to build a box even bigger than my current 10.26cuft box that is in my suburban. assuming that i get all of the mating surfaces to seal properly would 1inch thick plastic be better/same/ or worse than using birch or mfd?
plastic board speaker box?
slowpoke
21 - 35 of 35 Posts
Joined
·
3,154 Posts
me and you are going back and forth over this ?
all i basiclly said was "3/4 mdf is heavy"
you said, basically, "tell them to cut it for you"
an im like "tell who? it was a free sheet of lumber"
an im not about to jigsaw cut a whole sheet of plywood, to lighten it up,
ill just throw it on the tablesaw. rip it in 5 secs, an be done with it
its a vicious cycle i know,
but im open to all idea's
Joined
·
12,621 Posts
That's ok. I kinda figured you would have some brains enough to figure out how to cut up 3/4" mdf...I know its heavy, been buyin it for years when it was 20 bucks/sheet. Besides I got better things to do rather than tryin to figure out for you how to cut up mdf...
Joined
·
3,154 Posts
i never asked for your help to begin with :rofl:
but you kept offering. so i kept baiting.
Joined
·
12,621 Posts
This is a forum, everyone gets to chime in. Good day.
Joined
·
3,154 Posts
no hard feelings boomingtahoe,
i thought we were having some good ol fashion forum fun,
i do have a very dry sense of humor, its abrasive at times.
insulting, sarcastic, douchy, offensive but its all in fun.
im too old to take this thing serious (forums)
i thought we were having some good ol fashion forum fun,
i do have a very dry sense of humor, its abrasive at times.
insulting, sarcastic, douchy, offensive but its all in fun.
im too old to take this thing serious (forums)
Joined
·
3,154 Posts
good idea.....
or vice-versa, line the inside of your box with some slick plexi, like 1/8" plexi
ive heard of people armor-alling their interior, and gaining on the meter
Joined
·
12,621 Posts
Well I'll let it slide for now. I have a very good sense of humor...esp at work. Too many serious people. That being said, your old huh?! I'm close to 40 but yet I look like I'm in my early 30's...maybe 20's. Depending upon who cards me!!
Joined
·
1,411 Posts
I remember seeing the euros building a complete glass (2-3 inch)enclosure for ss1-2 and it was nuts, I think it gained like 4 DB from previous builds out of Mdf and resin
So plastic may yield a decent gain also
Sent from my DROID X2 using Tapatalk
Joined
·
660 Posts
Just noticed your in Hendersonville. I have some family in Hendersonville and am there all the time. I am across the lake in Mt Juliet:hello:
Joined
·
3,154 Posts
i live by the h-ville hospital,
an i work out in smyrna/lavergne,
the other side of the other lake, from you
an i work out in smyrna/lavergne,
the other side of the other lake, from you
Joined
·
660 Posts
My aunt lives in that subdivision across from the H-ville hospital.i live by the h-ville hospital,
an i work out in smyrna/lavergne,
the other side of the other lake, from you
I also have a office in Lavergne/ Smyrna between Waldron Rd and Sam Ridley on Industrial Blvd. Up there everyday. I wear Panda Express out.. LOL small world
Joined
·
3,154 Posts
yeah im old !!
an right now, in my life, im staying at home alot more,
i use to not even go home, at leastr until it was time to get ready for work again
an that gives me a lot of computer time after work.
Joined
·
3,154 Posts
oh yeah, along side the interstate?
i work in a shop off of waldron and murfreesboro rd, jordan dr,
and we do work at the nissan plant,
yep small world, we work right around the corner from each other :thumbsup:
i would say stop by the shop sometime, but i spend most of the day at the plant,
im in a white titan with huge co. logo on the doors
international industrial contracting corp,
just incase we cross paths
Joined
·
660 Posts
I'll keep a eye out. Hard to miss mine too, lifted F250 blacked out with my company logo. Zoom Moving on the doors and tailgate. One of my accounts is Ashley Furniture and we do all of their deliveries so I go up there daily to check on things. Maybe I will see you out or if you go to any Meca meets this year hallar at me:thumbsup:
21 - 35 of 35 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
