Search Results for ‘phoenix gold’

1. Product: PPI ART A600 non-working PPI ART A200 works but rough cosmetically Phoenix Gold ZX 450 2. Specs: Google search will answer everything 3. Description/Condition: I was going to have the 2 non working ones fixed and the A200 recapped but trying to fund more of my...

1. Product: Carver K MOS 2200 2. Specs: 2 Channel 2X100 @ 4 OHMS (2 Ohm stable) 2X200 @ 2 OHMS 4 ohm Bridgeable! 3. Description/Condition: Very very good, collector's condition, working perfect. missing the terminal screws on the high level input & 1 terminal screw...

Not mine, kinda wish the amp didn't get painted but that series of amps are known to develop rust anyway. Pretty good deal IMO. Custom Phoenix Gold Old Skool TI 1200 1 500 4 and DD10 Mint | eBay ** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **...

1. Product: Phoenix Gold Octane-R 9.0:5; 5-Channel Amplifier 2. Specs: Phoenix Gold R9.0:5 (octr905) Octane-R 9.0:5 5-Channel Amplifier RMS Power @ 4 ohms 50 watts x 4 chan. + 150 watts x 1 chan. RMS Power @ 2 ohms 75 watts x 4 chan. + 250 watts x 1 chan. Bridged RMS Power 150W...

Amp Name: Phoenix Gold The One Specs: 12,000w x 1 @ 1 ohm 8,000w x 1 @ 2 ohm Limited Edition Production Run 3 Ounce Gold Plated Circuit Board Six Power Supplies with Hand Wound Transformers Temperature Controlled Fan Cooling System High Efficiency Class D Topology 24dB Detented Low Pass...

I recently installed a phoenix gold sd component set in my honda civic. I have the bass boost on both turned all the way down and the gain at only 7. I know the speakers can get much louder than they do right now but when the midbass kicks in they start distorting. I was wondering if there...

Item(s) for Sale:RSD65CS 6.5 Components by phoenix gold Item(s) Description/Condition:these things can get LOUD with the right amount of power,I had them on Headunit power only (25 watts) and they kept up with my 4 15" subwoofers in my blazer,I had NO other speakers inside. They are in...

Product I'm looking for: Title speaks Budget: $300ish Condition: The better, the better Time Frame (if applicable): asap ** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED ** ----------------------------------------------- This message is automatically...

1. Product: Phoenix Gold Octane R 15.0:1 includes full 4 gauge wiring kit 2. Specs: 1000x1 at 2 ohms 500x1 at 4 ohms 1500x1 max power 3. Description/Condition: Good condition, used to power a kicker l7 15 solobaric, puts out true power 4. Price: : 165 shipped with wiring, 150 shipped...

1. Product: Hybridized Phoenix Gold Ti12D and Fi BTL 2. Specs: Brutal 12 Re = 5.8826 ohms Fs = 26.7623 Hz Zmax = 74.7219 ohms Qes = 0.3476 Qms = 4.0679 Qts = 0.3203 Le = 5.3850 mH (at 1 kHz) Diam = 257.1750 mm (...

What happens when an Fi BTL motor (new version) meets the top assembly of a Phoenix Gold Ti12d? lol. Look and see lol. Phoenix Gold BTL Titanium :: Phoenix Gold Ti12D Fi BTL Hybrid video by AudioPhill - Photobucket

1. Product: Audiopulse Axis Top Assembly, PG Ti12D Motor 2. Specs: Re = 2.2250 ohms Fs = 25.1087 Hz Zmax = 16.4296 ohms Qes = 0.89 Qms = 5.7735 Qts = 0.7819 Le = 1.1476 mH (at 1 kHz) Diam = 331.0000 mm ( 13.0315...

1. Product: (2) Phoenix Gold Titanium Elites 2. Specs: Rated for 1200 rms, I ran 1 one my 5 in 2.76 @ 25Hz on 1600 Class A/B Watts for 4 years and it's as cherry now as it was outta the box in 2003. 3 @ 20Hz has an f3 of 17Hz and plays flatter than any sub should from 19Hz to 60Hz...

I drive a 1999 Pontiac Grand Prix GT with the 3.8L Series II V6. Ive got a ZZP racing tranny in it with 2.9 gears, hardened input shaft and a higher stall. Ive got a GMPP performance handling kit on it with over sized sway bars, trailing arms, and a strut brace up front. Its also got a CAI...

1. Product: Phoenix Gold Ti12D x 2 {Traded} 2. Specs: 3. Description/Condition: Brand New, neither have seen power, pulled TSP's from one to compare to the one I've been using for 3 years. Both Boxes for each come with them, phenomenal SQ drivers if your not familiar, not a crazy SPL...