Alpine MRP-F250 4CH Amp with Extras
5
[SOLD] Alpine MRP-F250 4CH Amp with Extras
***SOLD***
1. Product:
Alpine MRP-F250 V-Power 4 Channel Power Amplifier
- With Free JL Audio XB 18' Twisted Pair RCAs and 2 Monster Standard Y-Adapters
2. Specs:
3. Description/Condition:
Great amp. Solid, clean power and guaranteed 100% functional. It has some small scuffs and scratches, but not very noticeable. Overall in very good condition.
I used it to power a set of PG RSd 6 3/4" components (100WRMS x 2 bridged) and it's worked perfectly and sounded great. I'm redoing my system with some new gear, so this amp is up for sale.
It's complete with end-caps, includes a copy of the owner's manual, and I'm also including 2 Monster Standard Interlink Y-Adapters and JL Audio XB Twisted Pair 18ft RCA cables (JL Audio XB-CLRAIC2-18 18 ft. 2 Channel Twisted-Pair Audio Interconnect Cable with Molded Connectors) - $25 worth of interconnects to allow proper Bridged operation (See diagram).
4. Price: $80 Shipped USPS Priority Mail - PayPal Preferred
5. Pictures:
![]()
![]()
![]()
![]()
![]()
***SOLD***
** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
-----------------------------------------------
This message is automatically inserted in all classified threads.
Please be advised, all buyers and sellers should satisfy themselves that the other party is genuine by providing the following via PM to each other after negotiations are complete and prior to dispatching goods and making payment:
1) Telephone number. Call the number back at a unspecified time and make sure that it is the person's correct phone number.
2) Name and address including postal code
3) Valid e-mail address. Send an e-mail requesting a response to information about the deal being made.
DO NOT proceed with a deal until you are completely satisfied with all details being correct. It's in your best interest to check out these details yourself.
If transaction was completed on CACO, please use iTrader to record feedback.
Potential buyers/seller should check iTrader feedback also before continuing transaction.
***SOLD***
1. Product:
Alpine MRP-F250 V-Power 4 Channel Power Amplifier
- With Free JL Audio XB 18' Twisted Pair RCAs and 2 Monster Standard Y-Adapters
2. Specs:
- 40 watts RMS x 4 at 4 ohms (50 watts RMS x 4 at 2 ohms)
- 100 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
- 2-, 3-, or 4-channel output
- variable high-pass/low-pass filters (50-400 Hz, 12 dB/octave)
- tuned Bass EQ (12 dB bass boost at 50 Hz for channels 3 & 4)
- subsonic filter (15 Hz, channels 3 & 4 only)
- MOSFET power supply
- CEA-2006 Compliant
- STAR Topology (minimizes internal noise and prevents ground interference)
- speaker- and preamp-level inputs
- preamp outputs
- gold-plated screw terminals
- fuse rating: 15A x 2
- 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- 11-1/4"W x 2-3/8"H x 9-9/16"D
3. Description/Condition:
Great amp. Solid, clean power and guaranteed 100% functional. It has some small scuffs and scratches, but not very noticeable. Overall in very good condition.
I used it to power a set of PG RSd 6 3/4" components (100WRMS x 2 bridged) and it's worked perfectly and sounded great. I'm redoing my system with some new gear, so this amp is up for sale.
It's complete with end-caps, includes a copy of the owner's manual, and I'm also including 2 Monster Standard Interlink Y-Adapters and JL Audio XB Twisted Pair 18ft RCA cables (JL Audio XB-CLRAIC2-18 18 ft. 2 Channel Twisted-Pair Audio Interconnect Cable with Molded Connectors) - $25 worth of interconnects to allow proper Bridged operation (See diagram).
4. Price: $80 Shipped USPS Priority Mail - PayPal Preferred
5. Pictures:
***SOLD***
** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
-----------------------------------------------
This message is automatically inserted in all classified threads.
Please be advised, all buyers and sellers should satisfy themselves that the other party is genuine by providing the following via PM to each other after negotiations are complete and prior to dispatching goods and making payment:
1) Telephone number. Call the number back at a unspecified time and make sure that it is the person's correct phone number.
2) Name and address including postal code
3) Valid e-mail address. Send an e-mail requesting a response to information about the deal being made.
DO NOT proceed with a deal until you are completely satisfied with all details being correct. It's in your best interest to check out these details yourself.
If transaction was completed on CACO, please use iTrader to record feedback.
Potential buyers/seller should check iTrader feedback also before continuing transaction.
