Car Audio Classifieds! banner

Status
Not open for further replies.
1 - 16 of 16 Posts

·
n00b looking to learn...
Joined
·
1,531 Posts
Discussion Starter · #1 · (Edited)
1. Product: Hifonics Bxi2008d class D amp



2. Specs: Brutus BXi Series Class D Monoblock Car Amplifier
RMS Power Rating:
4 ohms: 650 watts x 1 chan.
2 ohms: 1300 watts x 1 chan.
1 ohm: 2000 watts x 1 chan.
MOSFET power supply
Wired remote bass level control included
LED power and protection indicators
Tuned Bass EQ (0-10 dB bass boost at 45 Hz)
Variable unbalanced input level control
Dampening factor: >250
Soft turn-on circuitry
Preamp RCA outputs
DC, speaker short, thermal, and overload protection circuitry
Heavy duty aluminum alloy heatsink
Chrome-plated RCA level inputs
Chrome-plated screw terminals
Variable low-pass filter (35-250 Hz, 24 dB/octave)
Subsonic Filter (24 dB at 15-35 Hz)
Dimensions: 14.97"L x 9.45"W x 2.52"H
0-gauge power and ground wiring is required for installation.
External 200 amp fuse is required



3. Description/Condition: LNIB...This was purchased a few months back (April of 2011) and only used for a few months until I decided to start going bigger. Unit is in great shape both cosmetically and mechanically. Never had a single issue with it and has very little to no marks besides finger smudges on the polished pieces. Comes with remote bass knob and original packaging as seen in pics.



4. Price: : $220 shipped and insured...UPDATED...Trades I'm looking for a good 4 ch amp w/ 100 per channel. Preferably some sundown love lol!



5. Pictures:





















** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
-----------------------------------------------

This message is automatically inserted in all classified threads.

Please be advised, all buyers and sellers should satisfy themselves that the other party is genuine by providing the following via PM to each other after negotiations are complete and prior to dispatching goods and making payment:

1) Telephone number. Call the number back at a unspecified time and make sure that it is the person's correct phone number.

2) Name and address including postal code

3) Valid e-mail address. Send an e-mail requesting a response to information about the deal being made.


DO NOT proceed with a deal until you are completely satisfied with all details being correct. It's in your best interest to check out these details yourself.

If transaction was completed on CACO, please use iTrader to record feedback.

Potential buyers/seller should check iTrader feedback also before continuing transaction.
 

·
Registered
Joined
·
1,811 Posts
strong amp here.....If you give it the voltage it puts out big time. Brutus models should get more respect.

V.
 

·
n00b looking to learn...
Joined
·
1,531 Posts
Discussion Starter · #3 ·
Thanks vit...I thought it had enough oomph behind it for the application it was used for...till it blew my pioneer champion pro 12's lol! Thought they were supposed to be 1000w rms each :dontknow:

bumpage!!
 

·
n00b looking to learn...
Joined
·
1,531 Posts
Discussion Starter · #4 ·
Been contemplating and think I might be looking for a trade as well...
Looking for a good 4 ch amp w/ 100 per channel. Preferably some sundown love lol!

Open to offers!
 

·
n00b looking to learn...
Joined
·
1,531 Posts
Discussion Starter · #5 ·
No offers at all? Would be willing to add some cash to a SAX100.4 or similar....
 

·
n00b looking to learn...
Joined
·
1,531 Posts
Discussion Starter · #7 ·
Yepper...still here.
 

·
n00b looking to learn...
Joined
·
1,531 Posts
Discussion Starter · #9 ·
Yep...2 ohm minimum on each channel for 1 ohm internally. Just checked the manual to be sure...
 

·
n00b looking to learn...
Joined
·
1,531 Posts
Discussion Starter · #10 ·
TTT!
 

·
n00b looking to learn...
Joined
·
1,531 Posts
Discussion Starter · #11 ·
Daily rise to the top!
 

·
n00b looking to learn...
Joined
·
1,531 Posts
Discussion Starter · #13 ·

·
n00b looking to learn...
Joined
·
1,531 Posts
Discussion Starter · #14 ·
Trade for SAX100.4 pending.......
:icon_cheers:
 

·
n00b looking to learn...
Joined
·
1,531 Posts
Discussion Starter · #15 ·
Amp is no longer for sale as a working unit...went to test it today before shipping it out and found that it is not giving output the way it should be. Seems to be some interference...

Will sell as a non-working unit if someone is interested. Mods if this needs to be put in the broken section (assuming it would) please move it. Otherwise I'll just close it out and start a new one...
 

·
n00b looking to learn...
Joined
·
1,531 Posts
Discussion Starter · #16 ·
Trading amp after it gets repaired....closing thread
 
1 - 16 of 16 Posts
Status
Not open for further replies.
Top