[sleepingciv]

Ok so im looking to get 12 cubes outta my 93 civic.
How would I go about making sure I have enough room?

 

[gitrdoneltcg]

Wall it?

 

[sleepingciv]

ya was thinking wall or box built from front to back

just need to figure out how much area i have dont wanna buy to many subs lol

 

[Bologna]

ya was thinking wall or box built from front to back

just need to figure out how much area i have dont wanna buy to many subs lol

Well to figure that out, you will have to measure the area

 

[gitrdoneltcg]

How many subs and what size? I walled my 95 neon with 2 18in BLs and got 17 cubes after all displacements pretty easily

 

[sleepingciv]

o wow really
was hoping 4 sa 15s

 

[RRR37]

Hell yeah, wall it. You got plenty of room. Take some measurements top to bottom, then from the pillar to the back, and from pillar angling down to where the back of the box would be. Then go to the12volt and use the wedge box calculator to get a rough estimate of the space you have. I'm guessing you have more than 12^3 total. You will also be able to use some of the trunk for batts and amps, so as long as you don't need back seats you are good to go.

 

[SPLEclipse]

You've got waaay more than 12 ft^3. Without using the trunk and doing a floor-ceiling wall you probably have 18-20.

 

[sleepingciv]

Ok cool thanks guys
So I have never done a wall. Any tips ?
Ill prob build a spec box then set it upright with bracing and a cover plate? is this how its done?
Anyone wanna design me a box

 

[Bologna]

Ok cool thanks guys
So I have never done a wall. Any tips ?
Ill prob build a spec box then set it upright with bracing and a cover plate? is this how its done?
Anyone wanna design me a box

make a topic in the Box design section and I'm sure someone will be able to help ya out there

 

[lilsoccersully]

Ok cool thanks guys
So I have never done a wall. Any tips ?
Ill prob build a spec box then set it upright with bracing and a cover plate? is this how its done?
Anyone wanna design me a box

I got you just pm what your max measrements are and the subs you want to use

Sent from my PG86100 using Tapatalk