WTB: side post terminals

677 Views 21 Replies 6 Participants Last post by [email protected], Feb 8, 2011

[email protected]

Discussion Starter · Feb 7, 2011

Product I'm looking for:

some kind of terminals that will fit a gmc side post stock batt and will allow for mounting of the stock electrical plus 2 or more 1/0ga output for neg and pos side

Budget:
cheaper the better

Condition:
good useable

Time Frame (if applicable):

need to buy them this weekend

** DO NOT DELETE ANYTHING BELOW THIS LINE OR THREAD WILL BE DELETED **
-----------------------------------------------

This message is automatically inserted in all classified threads.

Please be advised, all buyers and sellers should satisfy themselves that the other party is genuine by providing the following via PM to each other after negotiations are complete and prior to dispatching goods and making payment:

1) Telephone number. Call the number back at a unspecified time and make sure that it is the person's correct phone number.

2) Name and address including postal code

3) Valid e-mail address. Send an e-mail requesting a response to information about the deal being made.

DO NOT proceed with a deal until you are completely satisfied with all details being correct. It's in your best interest to check out these details yourself.

If transaction was completed on CACO, please use iTrader to record feedback.

Potential seller should check iTrader feedback also before continuing transaction.

See less See more

1 - 20 of 22 Posts

LizP.

· #2 · Feb 7, 2011

Hope this isn't a post dump..

When I was looking for some last week I ended up just picking up "Side mount charger posts". Just like the name suggests, they are used for charging your battery but do just fine for holding my main run of 0ga, 4ga for frontstage amp and 0ga for sub amp + 0ga that connects my batteries to each other. $4 or so for the set

[email protected]

Discussion Starter · #3 · Feb 7, 2011

LizP. said:
Hope this isn't a post dump..

When I was looking for some last week I ended up just picking up "Side mount charger posts". Just like the name suggests, they are used for charging your battery but do just fine for holding my main run of 0ga, 4ga for frontstage amp and 0ga for sub amp + 0ga that connects my batteries to each other. $4 or so for the set

im at wrk and cant search many sites right now, where did you get them?
also got any pics?

Sinister-David

· #4 · Feb 7, 2011 (Edited)

3

Oreilly auto parts

Metra Gold GBPA1L Post Adapter

See less See more

LizP.

· #5 · Feb 7, 2011

I got mine at wal mart.

Side Terminal Charging Posts: BatteryMart.com

LizP.

· #6 · Feb 7, 2011

^
not exactly like what I got, but what he posted is exactly right

d-REW

· #7 · Feb 7, 2011

go to ace or home depot and find a bolt thats what i did i used those stinger and tsunami side post things ad they never worked right always came loose and even fell out 1 time

[email protected]

Discussion Starter · #8 · Feb 7, 2011 (Edited)

ok sorry for the confusion guys what i was looking for was something i could use to replace the stock terminal screws and also give the option to insert straight 1/0ga wire into it without having to add more ring terminals on the wire, kinda like how the popular top mount battery terminals are. this will be a temporary setup til i can get another dual-mount batt to replace my stocker.....the reason why i dont want to add ring terminals is because whenever i go to put the 1/0ga wire back on a top post batt i dont wanna have to cut the wire down decreasing the already short length of the wire.....hope that makes any sense

if i have to i guess i will go with some of the other bolts shown above

LizP.

· #9 · Feb 7, 2011

gotcha. I'd just pick up a replacement terminal that has a 6" or so of wire on it and tap into. Not ideal but I don't think I've seen side post terminals that will accept cable any other way.

[email protected]

Discussion Starter · #10 · Feb 7, 2011

LizP. said:
gotcha. I'd just pick up a replacement terminal that has a 6" or so of wire on it and tap into. Not ideal but I don't think I've seen side post terminals that will accept cable any other way.

ive never seen it before either but thought id give it a shot

[email protected]

Discussion Starter · #11 · Feb 7, 2011

anyone got any of these 1/0ga ring terminals and some extra long bolts to use on a side post batt? need 4 of them.

See less See more

Sinister-David

· #12 · Feb 7, 2011

u check your local car stereo place? or best buy

[email protected]

Discussion Starter · #13 · Feb 7, 2011

i can prolly get those here from the expensive stereo shops,but thought id find some used ones for the low on here since its gonna be a temporary set-up

Sinister-David

· #14 · Feb 7, 2011

check ebay also i was just thinking about shipping cost and so on u have any flea markets around might be able to get them there cheap also

mtrevino92

· #15 · Feb 7, 2011

LizP. said:
I got mine at wal mart.

Side Terminal Charging Posts: BatteryMart.com

Does anyone know if these will work with the 0/1 battery terminals made by ToolMaker?

fiji24

· #16 · Feb 7, 2011

This is what I used on my car...

Works great!

See less See more

fiji24

· #17 · Feb 7, 2011

I bought those off Darvex.com and the are Stinger GM battery terminals short post...

fiji24

· #18 · Feb 7, 2011

Here it is...
http://darvex.com/store/pc/Stinger-GM-HPM-Battery-Terminal-14p243.htm

[email protected]

Discussion Starter · #19 · Feb 8, 2011

not around this small town, i'll prolly go ahead and pick these up locally if no one has any by the end of tommorow

Sinister-David

· #20 · Feb 8, 2011 (Edited)

mtrevino92 said:
Does anyone know if these will work with the 0/1 battery terminals made by ToolMaker?

not to be mean why would u use those with something u had made by toolmaker i would get something a lot better like this

See less See more

1 - 20 of 22 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.